HAND PIECE

AUTOJUSTABLE CANNULA AUTOJUSTABLE CANNULA 2
HAND PIECE

AUTOJUSTABLE CANNULA

P-21551-05
rating 0 review
€26.50
Self-adjusting suction cannula, valid for most of the podological micromotors in the market, Nafran, Marathon, etc ...(Does not include micromotor of the 3rd photograph).
NOZZLE KIT FOR OIL LUBRICATION-OIL NOT INCLUDED- NOZZLE KIT FOR OIL LUBRICATION-OIL NOT INCLUDED- 2
REVERSE-ANGLES

NOZZLE KIT FOR OIL LUBRICATION-OIL NOT INCLUDED-

ROT000250
rating 0 review
€50.00
MICROMOTOR INTRA NHE1
HAND PIECE

MICROMOTOR INTRA NHE1

rating 0 review
€118.00
Dae Young Precision intramatic NHE1 micromotor with cable (35,000 rpm).For use with hand piece straight or with a counterangle.Perfect control of the revolutions.
HAND PIECE INTRAMATIC ES-6 KRAFIT HAND PIECE INTRAMATIC ES-6 KRAFIT 2
HAND PIECE

HAND PIECE INTRAMATIC ES-6 KRAFIT

rating 0 review
€125.00
• Straight handpiece with connection for E-Type motors (1: 1 up to 35,000 rpm)• With positioner for suction cannula.• Easy change of milling cutter using ball system (The milling cutter handle is easily rotated through two balls that are inside the handle facilitating the replacement of the milling cutter)• Excellent durability (good design against dirt)•...
MICROMOTOR +HANDPIECE SAESHIN MONOBLOCK 102 L MICROMOTOR +HANDPIECE SAESHIN MONOBLOCK 102 L 2
HAND PIECE

MICROMOTOR +HANDPIECE SAESHIN MONOBLOCK 102 L

P-21510-09
rating 0 review
€180.00
Monoblock joint composed of handpiece and motor for micromotors SAEYANG: Escort and Marathon
STAIGHT HAND PIECE TECHNOFLUX 1:1 INTERNAL SPRAY CX235-2B
STRAIGHT HAND PIECE

STAIGHT HAND PIECE TECHNOFLUX 1:1 INTERNAL SPRAY CX235-2B

ROT000730
rating 0 review
€199.00
Straight handpiece 1: 1 (without Light) Technoflux It is made of stainless steel. A straight surgical handpiece with internal spray that offers a 1: 1 transmission and is especially indicated for surgery and implantology for surgical drills with Ø 2.35mm and autoclave at 135ºC. With stainless steel coating. For high hygiene requirements, it is...
HAND PIECE NSK EX-6B HAND PIECE NSK EX-6B 2
  • On sale!
  • -10%
HAND PIECE

HAND PIECE NSK EX-6B

rating 0 review
€238.50 €265.00
Straight Handpiece / EX Series No OpticsNSK's super-precision microtechnology, developed after years of manufacturing experience, has achieved the lowest possible noise and vibration in this handpiece and guarantees a lowering of the milling cutter below 0.02 mm. It has the Clean Head system integrated in the handpiece. It prolongs the life of the...
Expand STRAIGHT HAND PIECE 1:1 LIGHT
STRAIGHT HAND PIECE

Expand STRAIGHT HAND PIECE 1:1 LIGHT

ROT000620
rating 0 review
€315.00
This piece of hand has a bath in titanium for further refinement of use and with light. A straight surgical handpiece with light and internal spray offers a 1: 1 transmission and is especially indicated for surgery and implantology for surgical drills with 2.35mm. With titanium coating, 30% less weight than steel to facilitate the agility of the...
HAND PIECE NSK - M65
HAND PIECE

HAND PIECE NSK - M65

rating 0 review
€423.00
Handpiece S-Max M65 from NSK. With SRAY INTERNAL.Handpiece without light 1: 1.Clean Head System.Single water spray No Optic.For HP milling cutters (Ø2.35).For AC cutters (Ø2.35) *.Max. Speed 40,000 min-1.* It is necessary to insert the stop of the supplied cutter.
OMNICUT OMNICUT 2
HAND PIECE

OMNICUT

rating 0 review
€480.00
Omnicut is a special patented tool head for a quick and safe removal of corneal tissue at the foot sole and heel. Omnicut is an ideal addition for the handpieces of the Profi Line of NSK. The special treatment head of Omnicut is equipped with two rotating blades. By this even obstinate, thickened layers of cornea can be removed layer by layer after...
MICROMOTOR MCX MICROMOTOR MCX 2
HAND PIECE

MICROMOTOR MCX

rating 0 review
€671.05
The MCX is not an induction micromotor like the others. Thanks to the electronic management Smart Logic, the power is regulated automatically adapting thus instantaneously to the variations of tensions. In this way, the MCX provides precise and constant power, without jerks.Thanks to its lifetime lubricated ball bearings, the MCX is a sterilizable...
MICROMOTOR MC2 IR BIEN AIR
HAND PIECE

MICROMOTOR MC2 IR BIEN AIR

rating 0 review
€803.00
Micromotor with coals MC2-IR series without light. Micromotors with normal torque, Intramatic type E coupling according to ISO 3964, internal spray. Turning speed from 60 rpm to 40 000 rpm.
MICROMOTOR MC2 GTAV BIEN AIR
HAND PIECE

MICROMOTOR MC2 GTAV BIEN AIR

rating 0 review
€875.62
Bien Air MC2 GTAV micromotor without light or spray, self-ventilated     Micromotor with brushes, 60-40,000 rpm, without light or spray,     Compatible with ISO 3964 type E coupling and Micro-Series instruments,     Self-ventilated.     Transmission: 1: 1,     Coupling type E Intramatic according to ISO 3964
Aesthetics MICROMOTORS
Create quotation from my cart

We use our own and third party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits.

If you go on surfing, we will consider you accepting its use. Can get more information here.